Alpha Microsystems Eagle 100 Specifications download pdf (Page 25)

Page 2-7Installation Instructions: Roadrunner 040 EAGLE 100/AM-3000M/VME Upgrade

MC1255

TOP OF MOUNTING PLATE

BOTTOM OF MOUNTING PLATE

Inside of Plate

(upside-down)

The AM-174 mounts

on top of the inner

(lower) set of stand-

offs where indicated.

AM-174 Mounting Standoffs

Before you install your Roadrunner, make sure it’s set up properly for your system

configuration. The AM-174 jumper configuration illustration in the chapter on "Board

Setup" explains the function of each jumper.

The Roadrunner board installs on top of the six metal standoffs located inside the metal

mounting plate.

Position the Roadrunner board as shown in the following illustration. Ensure the side of

the board with the SCSI bus connector (J1) is located nearest to the "handle" side of the

mounting plate!

The board is held in place with six 6-32 phillips-head screws.

PDI-00172-60, Rev. A02

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 88 89

No comments

Alpha Microsystems Eagle 100 Specifications Page 25